Starter Motor for MITSUBISHI Lester 19068 OEM M1T30671 12V 2.0kw 9T

Product Positioning

This starter motor replacement is intended for aftermarket starting system repair where the removed unit matches Lester 19068, M1T30671, or related Nissan reference numbers such as 23300-1CA0A, 23300-1CA0B, and 23300-1CA0C.

With a 2.0kW starting output, this model is commonly associated with larger Infiniti and Nissan applications, including SUVs, pickup trucks, vans, and selected light truck platforms. Compared with smaller 1.2kW or 1.4kW starters, this model should be selected with closer attention to the original part number, drive gear, rotation direction, and mounting dimensions.

This product is an aftermarket replacement component. Referenced brand names, vehicle names, and part numbers are used only for compatibility identification and cross-reference checking.

Core Specifications

Application Range by Vehicle Group

Infiniti SUV and Performance-Oriented Applications

This starter motor replacement is commonly matched with selected Infiniti models, including FX50, M56, Q70, Q70L, QX56, QX70, and QX80. These applications are often associated with higher-output engines and larger vehicle platforms, so replacement selection should be based on the original starter number and technical configuration, not only on the model name.

Nissan SUV, Van, and Pickup Applications

This model is also commonly matched with selected Nissan Armada, NV2500, NV3500, Pathfinder, Titan, and Titan XD applications. For repair channels and fleet maintenance suppliers, these vehicles often create ongoing starter motor replacement demand because they are used in family transport, commercial service, towing, utility work, and regional fleet operations.

Why This 2.0kW Starter Motor Requires Careful Matching

A 2.0kW starter motor is typically selected for applications that require stronger cranking output than many compact passenger vehicle starter motors. For buyers, the higher output alone is not enough to confirm compatibility. The starter must also match the original unit’s drive gear, rotation, flange diameter, and mounting geometry.

For this model, the most important confirmation points are:

• Lester 19068 or matching cross-reference number

• 12V electrical system

• 2.0kW starting output

• 9T drive gear

• CW rotation

• 70mm flange diameter

• Matching terminal and solenoid orientation

• Compatible mounting position

9T Drive Gear Matching

This model uses a 9-tooth drive gear. Teeth count is a critical detail because the starter drive must engage correctly with the flywheel or ring gear. A starter motor with the wrong tooth count may appear similar externally but can create engagement noise, poor starting performance, or installation mismatch.

For distributors and repair shops, the 9T specification should be clearly displayed in catalogs and product descriptions to help buyers distinguish this model from similar starter motors used in nearby Infiniti or Nissan applications.

70mm Flange and Mounting Check

The 70mm flange diameter helps identify the mounting configuration of this starter motor replacement. Before ordering, buyers should compare the removed unit’s flange size, mounting holes, housing shape, and terminal layout.

For bulk orders, sample confirmation or photo comparison is recommended when the customer cannot provide a clear part number label.

Suitable Procurement Scenarios

This starter motor replacement is suitable for:

• Infiniti and Nissan aftermarket starter motor programs

• SUV and pickup repair shop supply

• Van and light truck service channels

• Fleet maintenance parts sourcing

• Importer and distributor catalog expansion

• Regional auto parts wholesale supply

• Reference-number-based starter motor matching

• Replacement demand for aging Titan, Armada, QX80, and NV-series platforms

Fitment Confirmation Workflow

For accurate model selection, buyers can confirm this starter motor in the following order:

1. Check whether the original unit matches Lester 19068.

2. Compare the original label with M1T30671, M1T30672, M1T30673, 23300-1CA0A, 23300-1CA0B, or 23300-1CA0C.

3. Confirm the vehicle uses a 12V starting system.

4. Confirm the starter output requirement is 2.0kW.

5. Count or verify the 9T drive gear.

6. Confirm CW rotation.

7. Measure or compare the 70mm flange diameter.

8. Check mounting ears, solenoid position, and terminal layout.

9. Confirm vehicle make, model, engine, and production year.

10. Provide photos of the removed starter motor if the part number is missing or unclear.

Contact ATL Motor

Need a 12V 2.0kW 9T starter motor replacement cross-referenced with Lester 19068 or M1T30671? Contact ATL Motor with your required part number, vehicle application, or original unit photos. Our team can help check compatibility and recommend suitable starter motor replacement solutions for your market.

Contact ATL Motor

Need a 12V 2.0kW 9T starter motor replacement cross-referenced with Lester 19068 or M1T30671? Contact ATL Motor with your required part number, vehicle application, or original unit photos. Our team can help check compatibility and recommend suitable starter motor replacement solutions for your market.

FAQ

Q1. What are the key specifications of this model?

A: The key specifications are 12V voltage, 2.0kW power output, 9 teeth, CW rotation, and 70mm flange diameter.

Q2. Which part numbers can this starter motor be cross-referenced with?

A: This model can be cross-referenced with Lester 19068, PIC 103-545, M1T30671, M1T30672, M1T30673, 23300-1CA0A, 23300-1CA0B, 23300-1CA0C, 23300-1CA0CRE, 2330M-1CA0ARW, Remy 16171, and Wilson 91-27-3481.

Q3. Which vehicle applications is this starter motor commonly matched with?

A: It is commonly matched with selected Infiniti FX50, M56, Q70, Q70L, QX56, QX70, QX80, and Nissan Armada, NV2500, NV3500, Pathfinder, Titan, and Titan XD applications. Final fitment should be confirmed by original starter number and configuration.

Q4. Why is the 2.0kW output important?

A: The 2.0kW rating helps identify this starter motor for applications requiring stronger cranking output. However, output alone does not confirm compatibility. Buyers should also verify the part number, 9T drive gear, CW rotation, flange diameter, and mounting structure.

Q5.Is this starter motor suitable for wholesale supply?

A:Yes. This model is suitable for aftermarket distributors, importers, repair shop suppliers, fleet maintenance channels, and automotive parts wholesalers who source starter motors by reference number and vehicle application.